32 socket automated IC programming system with 4 high-speed device programmer MODEL 508PH.
PH-M2000S is a fully automated programming system that program 8 sockets x 4 sites, totaling 32 sockets, equipped with 4 Gang Programmer MODEL508PH (8 sites).
The integrated design of MODEL508PH and PH-M2000S enables all operations from the operation panel.
Equipped with four high-performance Gang Programmers MODEL 508PH developed for mounting on automatic machines. Supports from small capacity flash memory to large capacity memory such as eMMC and NAND.
When using the socket unit for eMMC, 16 sockets x 4 sites, 64 sockets in total can be programmed simultaneously.
Available for holding 20 JEDEC trays . Available for continuous running of 20 trays maximally.
The Pick & Place unit has a newly designed 2-axis specification and can carry two ICs at the same time.
High-performance CCD camara makes it easy for automatic fine tuning. Position of each IC device is corrected during automatic operation to ensure that the IC device can be correctly inserted into the socket.
Program data, coordinate data and identification data are managed by batch into the task data. Japanese, English and Chinese are available in the software. Bar code is also available.
|Device programmer||MODEL508PH (8 socket) x 4 units|
|Programmer buffer memory||Standard 1024Gbit|
|Target IC device||eMMC, eSD, GB-NAND, MoviNAND, i-NAND, NAND, OneNAND, Flash built-in MCU, NOR, etc.|
|Operation Log||Automatically save each lot in text format|
|Target IC package||TSOP・SOP・BGA・QFP|
|Target socket adapter||Open-top (OT socket adapter)|
|IC device handling||
X, Y, Z, θ 4-axis 2-phase pulse motor + belt drive
X-axis minimum resolution: 4.5 μm/pulse
Y-axis minimum resolution: 4.3 μm/pulse
Z-axis minimum resolution: 5.4 μm/pulse
|IC device handling capacity||
1100 [UPH] UPH = Units per hour
*Excluding work sequences such as tray transfer
|Coordinate data registration method||
X-Y, Theta coordinates: Visual setting with dedicated pad and dedicated jig
Fully automatic positioning method
Original system by image processing
|Image inspection function||Automatic correction of IC device transport posture by CCD camera image processing.|
Tray loader method (standard)/tube (option/under development)/tape (option/under development)
Target tray: JEDEC (size: 315.8mm x 135.8mm for automatic transfer *Vacuum pick site is necessary in the center)/EIAJ
Number of storage 20 supplies, 20 storage, 1 defective storage, 3 empty tray buffers.
|IC device marking (Option)||Room temperature curing type Shachihata TAT strong adhesion ink + Marking unit, supports dot marks and character marks.|
|User interface||LCD panel (PLC monitor, PC), keyboard, mouse|
|Model switching time||10 minutes or less *However, IC program data transfer time is not included.|
|Air supply||0.45Mpa-0.55Mpa 50l/min *Limited to dry air|
ACIN :AC100V/AC220V 50/60Hz 15A
Can be changed according to the installation location.
(D) 920 x (W) 1880 x (H) x 1540 (mm) Approx. 800 kg
* Does not include protrusions, PC, or monitor.