The 32 socket write-in full automatic programming system which carries two high-speed gang programmers MODEL408PH.
PH-M480 is 8 socket x 4 site and a total of 32 socket write-in full automatic programming system which carry four gang programmer MODEL408PH (eight-piece writing). By the unification design of MODEL408PH and PH-M480, an operation panel to all the operations are possible.
- High speed Gang programmer 48sets of "MODEL408PH"(8sockets ×4sites total 32pcs) auto programming system.
- PH-M480 with MODEL408PH is operated by panel operation easily.
- Main target is high density devices (higher programming time 90seconds)・NAND・eMMC, and Flash memory.
- Adjusting JIG is not needed to change socket adapter.
- 4sets of programmers with auto handler make it possible to high throughput for programming. Multiple programmers create high production capacity not depending on programming time.
|Buffer memory||Standard 256Gbit|
|Target devices||eMMC・eSD・GB-NAND・MoviNAND・i-NAND・NAND・OneNAND・Flash Micro controller・NOR・etc|
|Log file||.txt format for each lot|
X,Y,Z,θ axes use highly accurate stepper motors and timing belt drivers.
X,Y resolution: 4μm/pulse
Z resolution: 4μm/pulse
BASE model PH-M480 is configured manually.
X-Y,θ is trained using a remote teach original and provided JIG
Vision assisted teaching software is available.
|UPH||1000[UPH] UPH=Unit per Hour|
|Display inspection||Device position is corrected by CCD camera|
|Interface||Tray：JEDEC（Size ：315.8mm×135.8mm for Auto handler *it is neccessary for Tray “Center Vacuum Pickup Site”）/EIAJ Input 20 pieces、Output 20 pieces|
Shachihata TAT Ink
Dot marking、Character marking
|Control OS||FA PC OS: Windows XP ServicePack3|
|User interface||Color LCD Panel, Key board, Touch panel|
|Time to exchange socket adapter||Lower 300 seconds(Data transfer time is not included)|
|Air||0.4Mpa-0.5Mpa 50l/min ※Clean dry air only|
|Power Supply||ACIN :AC100V/ AC220V 50/60Hz 200VA|
※LCD display is not included.