PH-MReel(Full Automatic)
PH-MReel(Full Automatic)
PH-MReel which carries 2 MS-01 Serial Flash programmer is high performance system which can run programming, marking and taping devices such as Serial Flash ROM, EEPROM.
Special Features
-
Taping function
- Equipped with the Tape for evacuation (Out) separately from Tape for supply (IN)
- Process the taping by thermo compression bonding with cover tape after program.
- Process the taping by thermo compression bonding with cover tape after program.
- Scissile the tape after programming as necessary.
-
Eliminate ROM programming operation error
- could have programmed…by oversight….Eliminate the outflow of blank rom
- Eliminate the NG due to bentness of lead caused by operator.
- Eliminate the program error by master program download via LAN
-
Simplified Stamp Function
- Identifiable ROM version of the device by automatic stamp to programed device
Specification
| Programmer |
MODEL MS-01 |
|---|---|
| Target package | 8,16SOP,TSSOP,WSON,,,,etc |
| Buffer memory | 1Gbit |
| Operation mode | ERASE/BLANK/PROGRAM/VERIFY/CONT |
| Interface | USB2.0 SD card (for master-file transportation) |
| Socket adaptor | Special adaptor for MS-01 |
| Temperature range | 5-35°C |
| Power supply | AC100-240V/50-60Hz |
| Power consumption | 10VA(Max) |
| Size(WxHxD)/Weight | 85.5(W)x170(D)x60.5(H) / 660g |
| Target device | SOIC、TSSOP…etc | |
|---|---|---|
| Target tape |
JIS C 0806-3:2010 Embossed carrier tape (IEC 60286-3:2007 ANSI/EIA-481D-2008) |
|
| Target top cover tape | Top cover tape with Heat-Fusible adhesives | |
| Tap carrying method | Carrier system | Pulse motor and belt driven type |
| Manual operation | ||
| Rom Carrying method | Pulse motor(cam method) with rotary actuator | |
| Jam rate |
Less then 1/1000 Without deformed tape and Caused by Roms |
|
| UPH | 650pcs/hour (MAX) | |
| Mark | Dot marking | |
| Measure for safety | Emergency stop switch |
|
| Control | PC | FA personal computer |
| OS | Microsoft Windows ™ 7 Professional SP1 (Japanese) | |
| User interface |
Liquid crystal display, key board, mouse | |
| Utility | Power | AC100V single phase 50/60Hz 200VA |
| Supplied cable IEC60320 – JIS C 8303 (Class I) 3m | ||
| Air | 0.4〜0.5MPa 50L／Min. | |
| plug 20PM | ||
| Others | Paint color | N9.5 half eggshell paint |
| Size | 540(D)x1125(W)x970(H) mm without PC | |
| Weight | 80kg | |
