Device Programmer Model 1895/2 Discontinued product
Model for design and development
Model for design and development MODEL1895 Based 2 Site Gang Programmer.

For each model
Model | Built-in Socket | Standard buffer memory |
---|---|---|
Model 1895/2 | 2 | 1Gbit |
Model 1895/2 is a 2 site gang programmer with standard 256Mbits memory and max. 1Gbit memory. With optional programmer control software offers control of programmer from PC which is suitable for R & D and samll production.
Special Features
-
Targeted deive
Model 1895/2 is targeting various programable device such as flash memory (NOR, NAND, S-AND), EPROM, flash embeded one-chip microcontroller.
-
Socket Unit System
By utilizing the combination of socket units and various adaptors, Model 1895/2 supports various device package.
-
Data Transfer
Model 1895/2 is equippedwith USB interface. With optional remote control software (XPROM), fast data transfer can be accomplished through USB interface.
-
Others
The operation is simple and easy.
Socket unit
SU08-42D |
Two DIP 42pin sockets 8 bits JEDEC assign |
|
---|---|---|
Targeted device: EPROM, EEPROM, flash memory,One-chip Micro Controllers | ||
SU16-42D |
Two DIP 42pin sockets 16 bits JEDEC assign |
|
Targeted device: 16 bits EPROM, OTP | ||
SU16-48D |
Two DIP 48pin sockets 16 bits EIAJ assign |
|
Targeted device: 16 bits flash memory | ||
SU16-48TS |
Two TSOP 48pin sockets 16 bits EIAJ TSOP |
|
Targeted device: 16 bits flash memory |
Socket unit is required. Adapters for CSP, BGA, SOP, TSOP, PLCC and other packages are available. For more information, please download device list from our web site at www.minato.co.jp
Specification
Targeted device | EPROM, EEPROM, flash memory,One-chip Micro Controllers |
---|---|
Memory capacity | 128M bytes (1G bits) |
Maximum gang programming | 2 pieces |
Operation modes |
COPY: Copy the data from the number one PROM to the buffer of the programmer BLANK: Blank check of the PROM PROGRAM: Write data into the PROM VERIFY: Compare the data between the buffer memory and the device. CONT: Sequential operation of BLANK, PROGRAM and VERIFY ERASE: Erase the data in the flash PROM SET PROGRAM: 1, 2, 4, 8-programming mode |
Input data | Through RS232C/USB and copy of a master ROM data |
Interface | RS232C, USB |
Display | 20 x 4 characters LCD |
Power | 100〜240V、50〜66Hz |
Dimensions | 380(W)x107(H)x297(D)mm |
Weight | 5.2kg |
Power consumption | 30VA (maximum) |
Operating temperature | 5〜35°C |