Gang Programmer MODEL 400e+ Series
High speed programming evolves to an integrated solution
For each model
| Model | Built-in Socket | Standard buffer memory | Available for automatic programming system |
|---|---|---|---|
| MODEL404e+ | 4 |
64GB (512Gbit～) |
|
| MODEL408e+ | 8 |
64GB (512Gbit～) |
PH Series |
| MODEL416e+ | 16 |
64GB (512Gbit～) |
AH Series |
M400 series provide the efficient programming for the high density devices with summit-level programming speed in the programmer industry. M400e+ series are equipped with 256Gbit (32GByte) memory and support the Gbyte size device too.
Special Features
-
High-speed Programming
Programming Speed Comparison(H26M64103EMR) 32GByte writing MODEL404e+ P+H 26min. MODEL404 P+V 48min. MODEL1950 P+V 73min. 
-
SUeMMC-400e+ The specialized eMMC Socket Unit
SUeMMC-400e+ makes it possible to program Max 32 pcs of eMMC simultaneously on MODEL416e+(Standard simultaneous programming: 16pcs).
-
Easy-to-use operation soft (GUI view)
Managing LOT, changing partition of NAND flash and setting various information management as bad block become easier by easy-to-use operation soft (GUI view)
-
Effective for mass production! Con-current method.
MODEL 416 with newly-developed ‘Con-current programming method’ start to program devices per unit (4 sockets). Programming time is significantly shortend by this method.
-
Standard Model of mass production by Full Auto Programming System
-
The conbinations of Full Auto Programming System such as "PH-M100" and MODEL416 with Con-current method make more mass production all possible.
-
Socket Adapter can be used on full auto programming system such as "PH-M100". ective utilization of resouces has become possible.
-
Specification
| Programming Target |
1.2V to 3.3V flash ROM * 5.0V : under development NOR, Serial-ROM, NAND, One-NAND, i-NAND, MoviNAND, eMMC, eSD, flash embedded microcontroller SD memory card, memory card such as CF card |
|---|---|
| Memory Size |
Standard 128Gbit (16Gbyte) *Max. 256Gbit (32Gbyte) as an option |
| The number of simultaneous programming |
MODEL404e+: Max. 4pcs MODEL408e+: Max. 8pcs MODEL416e+: Max. 16pcs |
| Con-current Model | MODEL408e+・MODEL416e+ |
| Socket Unit |
SU400-48DP/3V (equipped on each MODEL as standard) *for 16bit EIAJ DIP array 1.2～3.3V flash memory SU400-42DP/5V (under development) *for 8bit JEDEC DIP array 5.0V EPROM, flash memory, flash embedded microcontroller |
| Supporting OS | Windows XP/Windows Vista/Windows 7 |
| Data Format | Binary format (no format), INTEL HEX, Motorola-S |
| Operating Mode |
Select: Select a device Config: Configuration Load: Load master data file into the buffer memory Save: Save data Load Pri: Load Project file data Save Prj: Save project file data Edit: Edit data in the buffer memory Copy: Copy data from master data to the buffer memory of the programmer. Blank: Blank check of flash ROM Prog: Program data in the memory into flash ROM. Verify: Verify data in flash ROM and the buffer memory of programmer Erase: Erase data in Flash ROM |
| External Interface | USB2.0 |
| Power Supply (voltage/frequency) | AC100V～AC240V / 50Hz～60Hz |
| Measurement / Weight (with socket unit) |
MODEL404e+: 230(W)x260(D)x110(H)mm / 2.4Kg MODEL408e+: 380(W)x260(D)x110(H)mm / 5.2Kg MODEL416e+: 380(W)x390(D)x120(H)mm / 9.0Kg |
| Power Consumption (Maximum) |
MODEL404e+: 60VA MODEL408e+: 100VA MODEL416e+: 200VA |
| Recommended Temperature | 5～35°C |
| Certification | RoHS compliant, CE Marking (under acquisition) |
