PRODUCT & SERVICE Device Programmer
- MINATO
- PRODUCT & SERVICE
- Device Programmer
- Product lineup
- Gang Programmer MODEL 1896
Gang Programmer MODEL 1896 Discontinued product
Realized to program 8 microcomputer chips of various manufacturer simultaneously.
Gang programmer with standard 1Gbit memory.
For each model
| MODEL | Built-in Socket | Standard buffer memory |
|---|---|---|
| MODEL 1896 | 8 | 1Gbit |
MODEL 1896 is 8 site a gang programmer with standard 1Gbit memory. Based on the architecture of the best seller M1895.
Special Features
Universal Socket Unit
SU816 is a universal socket unit that is capable of handling IC supported by SU16-48D and SU08-42D socket unit of MODEL 1895. MODEL 1896 can program 8 pieces of Microcontrollers simultaneously.
Targeted Device for Programming
MODEL 1896 is supporting various programmable memories such (NOR, NAND type), EPROM, flash embeded one chip microcontroller.
Data Transfer
Utilizing USB interface, fast data transfer can be accomplished by optional remote control software XPROM.
- Optional socket unit SU16-42D is required to program 16bit JEDEC device such as 27C1024, 2048, 4096.
Socket unit SU816 (standard 4 socket unit)
| Socket unit | DIP array | Target device |
|---|---|---|
| DIP42 pin socket | 8 bit JEDEC DIP assignment | Targeting device: 8 bit EPROM, Flash ROM, One Chip Micro Controller, etc |
| DIP48 pin socket | 16 bit EIAJ DIP assignment | Targeting device: 16 bit EPROM, Flash ROM, etc |
To program 16 bit JEDEC DIP assignment EPROM, optional socket unit SU16-42D is required.
To program special package such as BGA, QFP, optional conversion adaptor is required.
For detail, please refer to Device Code List.
Specification
| Programming Target |
EPROM, EEPROM, Flash ROM, One chip microcontroller
|
|---|---|
| Memory Size | Standard: 1G bit |
| The number of simultaneous programming | Max. number of simultaneous programming 8 pieces (standard 4 socket unit) |
| Operating Mode |
COPY: Copy data from flash ROM to the buffer memory of the programmer.
BLANK: Blank check of flash ROM PROGRAM: Program and verify data VERIFY: Verify data in flash ROM and the buffer memory of the programmer CONT: Continuous operation of BLANK+PROGARM+VERIFY ERASE: Erase data in flash ROM SET PROGRAM: Simultaneous programming of different data, divided data programming in 16 bits, divided data programming in 32 bit |
| Data Input |
USB, RS232-C, Copy from master ROM
|
| Interface |
USB, RS232-C
|
| Display | 20 x 4 (characters), LCD |
| Power Supply | From 100 to 240V(automatic change), 50 – 66Hz |
| Measurement | 380(W)x100(H)x400(D)mm |
| Weight | 5kg(6.5kg with socket unit) |
| Power Consumption | 30VA(Max.) |
| Recommended Temperature | 5～35°C |